Accton Technology MR3201A Quick Installation Manual

Download this manual

Quick Installation Guide

1 1 .

Before getting

started...

Required components

Before installing MR3201A, check that

you have the correct components to

join MR3201A.

Broadband connection

(ADSL, cable, etc)

ADSL

CABLE

Router or Modem

ADSL Router or cable

modem from your

Internet Service Provider

WiFi

Wireless device, either a

laptop or another device

with a wireless adapter

What's in the Box?

A network cable (white)

AC Adapter

Quick Installation Guide

Page 1: Quick Installation Guide
Quick Installation Guide 1 1 . Before getting What's in the Box? started... A network cable (white) Required components Before installing MR3201A, check that you have the correct components to join MR3201A. Broadband connection AC Adapter (ADSL, cable, etc) ADSL...
Page 2 Connect one end of the white network cable to Plug in MR3201A. MR3201A's internet port. Check that MR3201A’s Power and LAN lights are on. 2. Connect the other end of the network cable to one of your ISP router's LAN Ethernet ports.
Page 3 If you can't see signals, click on the "Refresh network list" button ( a ). If the problem persists, check that you've installed MR3201A properly. If you see MR3201A private signal but do not find the public signal, check the User Manual, since you will need to make some network configuration adjustments in MR3201A.
Page 4: Fcc Regulations
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.