Explanation Of Product Stickers; Type Designation And Serial Number; Ce Label; Benchmark - Vaillant flexoTHERM exclusive VWF 57/4 Installation And Maintenance Instructions Manual

Information on the identifica-
tion plate
COP W10/W35 /W45 /W55
W10/W35 /W45 /W55
V
Hz
W
IP
4.3

Explanation of product stickers

Symbol on the sticker
A
B
0020213395_00 flexoTHERM exclusive Installation and maintenance instructions
Meaning
Output figure (coefficient of
performance) at a groundwa-
ter temperature of 10 °C and
a heating flow temperature
of 35/45/55 °C
Heating output at a ground-
water temperature of 10 °C
and a heating flow temperat-
ure of 35/45/55 °C
Mains voltage
Power frequency
Power consumption
Protection class
Information on disposal
Barcode with serial number,
7th to 16th digits = product
article number
Read the instructions
Meaning
Heating flow connection
Heating return connection
Heating diaphragm expan-
sion tank connection
Connection from the heat
source to the heat pump (hot
brine)
Connection from the heat
pump to the heat source
(cold brine)
Brine heat source
Energy supply company anti-
cycling time
Product description 4
4.4

Type designation and serial number

The type designation and serial number can be found on
a plate behind the front flap and on the main identification
plate. The 7th to 16th digits of the serial number form the
article number.
4.5

CE label

The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
4.6

Benchmark

Applicability: Great Britain
Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer's instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
11