Connecting the cables
1.
Place the monitor in a convenient, well-ventilated location near the computer.
2.
Remove the cable management clip from the pedestal by pulling outward on the two sides of the
clip (1) and lifting the clip off the pedestal (2).
Figure 3-3
NOTE:
3.
Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable.
NOTE:
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the
panel or through the on-screen display (OSD) feature by pressing the
For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to
●
the VGA connector on the rear of the monitor and to the VGA connector on the computer.
For DVI digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal
●
cable to the DVI connector on the rear of the monitor and to the DVI connector on the
computer.
For DisplayPort digital operation, use the DisplayPort signal cable provided. Connect the
●
DisplayPort signal cable to the DisplayPort connector on the rear of the monitor and to the
DisplayPort connector on the computer.
4.
Connect one end of the provided audio cable to the audio connector on the computer, and
connect the other end to the audio-in connector on the monitor.
5.
Connect one end of the provided USB cable to the USB upstream connector on the rear of the
monitor, and connect the other end to a USB connector on the computer.
Removing the cable management clip
The L2206tm panel head model does not ship with a stand.
The monitor is capable of supporting either analog or digital input. The video mode is
+/source
button on the front
Menu
button.
Connecting the cables
7