Advertisement
•
BB STANDARDS/FD MOUNTING DETAILS
Scale is available for PressFit 92 Cartridges (PF92).
PF BB 92 has a housing width of 92mm (Scale 700) or 89.5mm plus a 2.5mm additional
washer (Scale 900, Scale Plus) with an inner diameter for the cartridges of 41mm.
Scale 700 (27.05") FD
The front derailleur (FD) fixation for Scale 700 is a
direct mount system.
It is made for Shimano E-Type derailleurs or SRAM S3
assembly.
For Scale Plus the FD fixation is E-Type with 3mm
outboard to match with rear hub boost standard.
In addition it has an integrated chainguide assembled
on this fixation plate.
Scale 900 (29") FD
The Front Derailleur (FD) clamp is with an inner
diameter of 34.9mm, the cable routing on the frame is
for "down route/pull - down swing" models.
IMPORTANT!
Please note that the maximum tightening torque on the FD clamp is 5Nm/44in/lbs.
A higher tightening torque might cause damage to the FD camp and/or frame tube!
Please also refer to the related manuals of the manufacturer of the FD.
•
CHAINGUIDE
On some Scale 900 (29") Carbon models you will find a chainguide system to support the
shifting performance when using 2 chainring cranksets.
3 different mounting plates are available to match the different sizes of the outer chainrings
(39/42/44T).
Please note the max. tightening torque of 5Nm/44 in/lbs on the mounting screw of the plate.
| 06
ENGLISH
SCALE
| 2016 BIKE USER MANUAL
•
HEADSET OPTIONS
Scale features a tapered headset and fork steerer system to match with semi-integrated
headsets of the "50-61"mm range.
The steerers of those forks are
tapered from 1.5" to 1 1/8".
This bigger diameter of the fork
steerer as well as on the frame
headtube helps to increase the
stiffness and handling of the bike.
2016 BIKE USER MANUAL |
SCALE
ENGLISH
07 |
Hide quick links:
Advertisement
