Wiring Connection - Kenwood KMM-102 Instruction Manual

INSTALLATION / CONNECTION

Wiring connection

IMPORTANT: We recommend installing the unit with a
commercially available custom wiring harness specific for
your car and leave this job to professionals for your safety.
Consult your car audio dealer.
When connecting to an external amplifier, connect its ground
wire to the car's chassis to avoid damaging the unit.
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Battery
To the metallic body or chassis of the car
Fuse (10 A)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control wire)
Front/ Rear/ subwoofer
output
Antenna terminal
To the terminal that is grounded when the telephone
rings or during conversation ( 13)
(To connect the Kenwood navigation system, refer your
navigation manual.)
To the power control terminal when using the optional
power amplifier or to the antenna control terminal in
the vehicle
To the steering wheel remote control adapter
17
ENGLISH