Specifications - Kenwood KMM-102 Instruction Manual

SPECIFICATIONS

FM Frequency Range
Channel Space Selection
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
AM Frequency Range
Channel Space Selection
Usable Sensitivity
(S/N = 20 dB)
USB Standard
File System
Maximum Supply Current
Frequency Response (±1 dB)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
MP3 Decode
WMA Decode
WAV Decode
FLAC Decode
18
87.5 MHz — 108.0 MHz (50 kHz space)
50 kHz
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
30 Hz — 15 kHz
64 dB
40 dB
Band 1 (MW) 531 kHz — 1 611 kHz
(9 kHz space)
Band 2 (SW1) 2 940 kHz — 7 735 kHz
(5 kHz space)
Band 3 (SW2) 9 500 kHz — 10 135 kHz/
11 580 kHz — 18 135 kHz
(5 kHz space)
Band 1 9 kHz
Band 2/ 3 5 kHz
MW 29.0 dBμ (28.2 μV)
SW 30 dBμ (32 μV)
USB 1.1, USB 2.0 Full Speed
FAT12/ 16/ 32
DC 5 V 1 A
20 Hz — 20 kHz
105 dB
88 dB
90 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Linear-PCM
FLAC file (Up to 48 kHz / 16 bit)
Maximum Output Power
Full Bandwidth Power
Speaker Impedance
Tone Action
Preout Level/Load (USB)
Preout Impedance
Frequency Response (±3 dB)
Input Maximum Voltage
Input Impedance
Operating Voltage
Maximum Current Consumption
Operational Temperature Range
Installation Size (W × H × D)
Weight
libFLAC
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ONTRIBUTORS "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Subject to change without notice.
50 W × 4
22 W × 4 (at less than 1 % THD)
4 Ω — 8 Ω
Bass 100 Hz ±8 dB
Middle 1.0 kHz ±8 dB
Treble 12.5 kHz ±8 dB
2 500 mV/10 kΩ
≤ 600 Ω
20 Hz — 20 kHz
1 000 mV
30 kΩ
14.4 V (10.5 V — 16 V allowable)
10 A
–10°C — +60°C
182 mm × 53 mm × 107 mm
0.6 kg