Table of Contents
Advertisement
•
USB bus-powered; no external power supply is
required.
•
Hot Plug and Play for Microsoft Windows 98 (SE),
2000, Me, and XP
•
Mac OS and Linux
•
Supports NDIS interface for RAS and Dial-Up
Networking
•
Software upgradable
•
Supports multiple data encapsulation formats,
including PPPoE, PPPoA, IPoA, and RFC1483
bridged or routed
•
Friendly GUI Configuration Program
1.4 Before Installing
Make sure that you have all you need to install the Clipper
USB. You should have the following:
•
A PC that has USB connector and its USB controller
is working properly as shown below
•
Microsoft Windows 98SE, ME,2000 or XP
•
Mac OS: 9.2.1 / 10.1 / 10.2.3
•
Linux OS: [RedHat 7.1 (kernel 2.4.2-2), RedHat 8.0
(kernel 2.4.18-14), RedHat 9.0 (kernel 2.4.20-8)]
•
At least 10MB of free disk space for the driver and
software
•
An ADSL contract
•
Intel® Pentium®III 600Mhz or compatible processor
with 128MB RAM with CDRom drive
Clipper USB
Advertisement
Table of Contents
