Setting The Multi Room Setup; Setting The Network Setup; Network Settings Overview; Setting The Direct Wireless Network Connection - Sherwood R-807 Operating Instructions Manual

Setting the Multi Room Setup

In addition to your main room, you can also enjoy
playback in Room2.
menu item Description
On Turns on the Room2 function.
Off
Turns off the Room2 function.
Note
• When Room2 is set to "OFF", the input and the
volume cannot be selected.
• When you do not use the Room2 function, set
the Room2 to "OFF" to save electricity.
• The digital signals (including signals from the
USB IN) cannot be output to the other rooms,
meaning no playback in Room 2.

Setting the Network Setup

To listen to Internet radio stations or music files stored
on your computer via a wired/wireless network, you
should configure network settings first.
1
Press SETUP on the remote control.
2
Press  or  to navigate up or down the menu.
3
Press ENTER to confirm the desired menu.
Press RETURN to move to the previous menu.

Network Settings Overview

main menu Sub menu
Soft AP
Direct
hotspot
AV Set
Wi-Fi direct
NETWORk
CONNECT
Ethernet
Wired
Ethernet
Configuration
AP Name
Resolution
OTHER
Display size
Factory Setting
Network Information
INFORmATION
Passcode Information
Setting the Direct Wireless Network
Connection
You can connect the main unit with a mobile device
wirelessly through Soft AP hotspot or Wi-Fi direct.
Soft AP hotspot
When you enable Soft AP hotspot, you can use the
main unit as a wireless access point. It provides internet
access to network devices.
Wi-Fi direct
Wi-Fi Direct is a standard that allows Wi-Fi devices to
connect to the main unit without the need for a wireless
access point. When you enable Wi-Fi Direct, you can
directly transfer data between Wi-Fi direct devices and
the main unit without the need for full setup.
Customizing Settings
Go to Page
49
49
50
50
50
50
50
50
50
50
49