Installing The Wi-Drive Application - Kingston Technology Wi-Drive 16GB User Manual

Installing the Wi-Drive Application

To configure Wi-Drive, you must first install the Wi-Drive App (to your iPad, Iphone, or Ipod touch device) from the
on-line App Store (Internet access required). The Wi-Drive App is free and allows you to customize the wireless
network settings and wirelessly access the content you've uploaded to Wi-Drive. To install the App, please follow
these steps:
1. Open the App Store from your iPad, iPhone, or iPod touch device and search for "Kingston." See Figure
4.1 below. The App Store may return multiple results for your search, just be sure to select Kingston Wi-
Drive.
2. Locate and select the Wi-Drive App that corresponds to your device, i.e. Wi-Drive for iPad, for iPhone,
iPod touch, etc. by Kingston Digital, Inc. and tap the 'FREE' button link. See Figure 4.2.
3. After selecting 'FREE,' the grey button will turn green and change to 'INSTALL APP.' Select this button to
complete the installation of the App to your device. See Figure 4.3.
Once the App has been installed, you may exit the App Store and proceed to the next section of this manual.
Document No. 480-13WID-001.A00
Figure 4.1 – App Store Search
Figure 4.2 – Wi-Drive App by Kingston Digital, 'FREE'
Figure 4.3 – Wi-Drive App by Kingston Digital, 'INSTALL APP'
Kingston Page 4 of 15