3Com SUPERSTACK 3 Quick Reference Manual page 3

Web Interface Device Mimic
Unit
For example purposes only, this graphic shows a Switch 4400 PWR.
A Quick Guide to the Web Interface Operations
This table describes the operations that are available in the Web Interface.
Operation
System Getting Started
System Console Setup
System Control Initialize
System Control Reboot
System Control Software Upgrade
System Management Setup
System Management Alert Create
System Management Alert Modify
System Management Alert Test
System Management Alert Delete
System Management Alert Summary
System Management Monitor Modify
System Management Monitor Summary
Notepad
History-1 Hour
Setup
History-48 Hours
Statistics
Port Setup Summary
Port Security
What does the Operation do?
Guides you through the initial configuration of the stack.
Configures the type, speed and flow of a console port.
Initializes every unit in the stack to factory default settings.
Resets all units in the stack simultaneously.
Upgrades the software on all units in the stack.
Changes information for the stack.
Creates and defines an email alert and its distribution.
Modifies an existing email alert and its distribution.
Sends a test email alert.
Deletes an existing email alert.
Displays summary information for configured email alerts.
Sets up a device or port to be monitored for email alerts.
Displays summary information for devices or ports on which
monitoring is enabled.
Name
Setup
3
Setup