Setting The Key Management Function; Figure 2.2 Login Screen For The Security Administrator Account - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.2

Setting the Key Management Function

This setting enables or disables the key management function.
For logical library (or partition) configurations, the setting can be performed separately for each logical library
(or partition).
To set the key management function, a security administrator account must be used to log in to the remote
panel.
2.1.2.1 Changing the Initial Password of the Security Administrator Account
To log in to the remote panel with a security administrator account, the initial password of the account must
be changed from the operator panel in advance.
The security administrator has the following account name and initial password.
User (account name)
Password (initial password)
Procedure
1
Select the "security" administrator account on the operator panel, enter "security" as the
initial password, and click the [Login] button.

Figure 2.2 Login screen for the security administrator account

The screen changes to the [Configuration > User Account] screen.
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
security (alphabetical characters)
security (alphabetical characters)
23
Copyright 2016 FUJITSU LIMITED P3AG-1192-02ENZ0