Figure 2.35 Selecting The Partition Where The Deletion Target Encryption Key Exists - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.4.3 Deleting the Encryption Key
This function deletes the imported encryption key. Use this function to delete the unnecessary encryption key
after using the encrypted data cartridge that was brought in from outside.
This function is used to delete the imported encryption key that is used for encrypted data cartridges that
were brought in from the outside. Note that this function cannot be used for deleting encryption keys that
are automatically assigned to the data cartridge from the tape library.
Procedure
1
Move to the [Configuration > Encryption > LT Encryption] screen.
2
Select [Encryption keys] from the menu.
3
Select [Delete Encryption Key/s] from the menu.
4
Select the partition that stores the data cartridge for deleting the encryption key.
If no logical libraries (or partitions) are configured, only "Partition_1" is displayed in the drop down
list.

Figure 2.35 Selecting the partition where the deletion target encryption key exists

FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
52
Copyright 2016 FUJITSU LIMITED P3AG-1192-02ENZ0