Fujitsu ETERNUS LT260 User Manual page 62

Chapter 2 Setup and Operation Procedures
2.3 Checking the Setting Information
For Ultrium3 or earlier data cartridges, all the items above are displayed as "N/A".
2.3.4.2 Using the Inventory Graphical View
To use the inventory graphical view to check the encryption setting information of the data cartridge, follow
the procedure below.
Procedure
1
Log in to the remote panel.
2
Move to the [Status > Cartridge Inventory > Graphical View] screen.
3
Move the mouse over the data cartridge that is to be checked.
Detailed information is displayed. The encryption setting information of the data cartridge can be
checked by viewing [Encryption] and [LT Encryption Key].
• Encryption
-
-
-
• LT Encryption Key
-
-
-
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
Not Encrypted
An encryption key is assigned, but there is no encrypted data.
Encrypted
An encryption key is assigned and encrypted data exists.
N/A
An encryption key is not assigned.
Auto
An automatically generated encryption key is used.
Import
An imported encryption key is used.
N/A
An encryption key is not assigned.
Copyright 2016 FUJITSU LIMITED
62
End of procedure
P3AG-1192-02ENZ0