Figure 2.24 Deleting The Master Key - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.3.4 Deleting the Master Key
This function can delete any unnecessary master key.
Procedure
1
Move to the [Configuration > Encryption > LT Encryption] screen.
2
Select [Master Keys] > [Delete Key] on the center pane.
3
Click [Delete] for the partition where the master key that is to be deleted exists.
If no logical libraries (or partitions) are configured, only "Partition_1" is displayed in the partition list.
Only a single master key can be deleted at a time. When deleting the master keys of multiple
partitions, repeat the procedure from

Figure 2.24 Deleting the master key

FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
Step 3 and onward.
41
Copyright 2016 FUJITSU LIMITED P3AG-1192-02ENZ0