Toshiba E studio 2010C Quick Start Manual page 74

Chapter 6 INFORMATION ABOUT EQUIPMENT
e-STUDIO050C/550C, e-STUDIO051C/551C Specifications
Model name
Type
Original glass
Printing (copying) system
Developing system
Fixing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Scanning
Resolution
Writing
Acceptable originals
Acceptable original size
Drawer
Acceptable copy
paper size
Bypass
Drawer
Acceptable copy
paper weight
Bypass
Warm-up time
First copy time
Black-and-white
(A4 or LT
Color
portrait)
Continuous copy speed
Multiple copying
Black-and-white
Excluded image
Color
width
Printer (Black-
and-white/Color)
Actual size
Reproduction
ratio
Zoom
Drawer
Paper supply
Bypass
Exit tray loading capacity
Toner density adjustment
Exposure control
USB interface
Environment (for normal use)
Power requirements and Power
consumption
(including optional equipments)
Dimensions (equipment only)
Weight
Space occupied (equipment only)
Storage capacity
• This specification varies depending on the printing conditions and the environment.
• Specifications and appearance are subject to change without notice in the interest of product improvement.
7
FC-2050C/2550C
FC-2051C/2551C
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
Roller fusing
OPC
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Linear CCD sensor
LED
600 dpi x 600 dpi
Color, Black-and-white (Grayscale): 600 dpi x 600 dpi, 5 bits
Sheets, books
Max. A3 or LD
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K,
16K-R
Paper size within 100 - 297 mm (3.94" - 11.69") (Length),
148 - 432 mm (5.83" - 17.01") (Width)
60 - 163 g/m (16 lb. Bond - 90 lb. Index)
2
Continuous paper feed / Single paper feed: 60 - 209 g/m
Approx. 35 seconds
Approx. 8.2 seconds
Approx. 10.3 seconds
Refer to the Copying Guide.
Up to 999 sheets (digital key entry)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Leading edge: 5.0 mm +2.0 mm (0.20"±0.08"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
Trailing edge: 4.2 mm +1.2 mm -2.8 mm (0.17" +0.05" -0.11"),
Both edges: 4.2±2.0 mm (0.08"±0.08")
100±0.5%
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Approx. 250 sheets (80 g/m , 20 lb. Bond)
2
Approx. 100 sheets (80 g/m 2 , 20 lb. Bond)
Approx. 550 sheets (80 g/m , 20 lb. Bond)
2
Magnetic auto-toner system + Pixel count system
Automatic plus manual selection from 11 exposure step
USB 2.0 (Hi-Speed)
Temperature: 10 - 30 °C (50 - 86 °F), Humidity: 20 - 85% (No Condensation)
AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or less
575 mm (22.6") (W) x 590 mm (23.2") (D) x 662 mm (26.0") (H) (At 90 degrees of the control
panel angle)
575 mm (22.6") (W) x 707 mm (27.8") (D) x 662 mm (26.0") (H) (At 7 degrees of the control
panel angle)
e-STUDIO2050C/2550C: Approx. 57 kg (125.7 lb.) (equipment including developer and drum)
e-STUDIO2051C/2551C: Approx. 56 kg (123.5 lb.) (equipment including developer and drum)
964 mm (38") (W) x 707 mm (27.8") (D) (At 7 degrees of the control panel angle)
For e-STUDIO2050C/2550C (when hard disk is installed): Max. 1000 sheets or until the
memory is full (Toshiba's own chart)
For e-STUDIO2050C/2550C (when hard disk is not installed) or e-STUDIO2051C/2551C: Until
the memory is full
(16 lb. Bond - 110 lb. Index)
2