Odyssey ODY-5 Owner's Manual page 8

FIG. 19 Next, attach two Nylon Pulleys 4 1/2 Rd. (#64-Labeled C,E) to
the pulley bracket located on the
secure them into place using one Hex Head Cap Screw 3/8-16 X 2 3/4
(#91), two Flat Washers SAE 3/8" (#71) and one N ylon Insert Jam Lock
Nut 3/8-16 (#82).
FIG. 21 Secure the Left Pec Dec Arm (#7)
Head Cap Screw 3/8-16 X 1 (#95), one Split Washer 3/8" (#76) and one
Fender Washer 3/8 X 1 1/2 (#72). Repeat the same procedure for the
Right Pec Dec Arm (#6). Refer to the Exploded View Diagram on page
26 for further illustration of this assembly.
7
Press Bar Selector Housing (#17)
into place using one Hex
FIG. 20 Next, insert the
and shown above, into the receptacle on the
same procedure for the
page 28 or the Exploded View Diagram on page 26 for further illustration
of this assembly.
Note: It is recommended to grease both axles on the
Right Pec Dec Arms (#7,#6)
assembling.
FIG. 22 Locate the two
them on a flat surface, as shown above.
Note: Parts (#47, #50 and #59) have been pre-assembled on the
Pec Dec Swivel Handles (#8)
Left Pec Dec Arm (#7), in the position as
Front Upright
Right Pec Dec Arm (#6). Refer to Fig. 72 on
with multi-purpose grease prior to
Pec Dec Swivel Handles (#8)
by the factory.
ODY-5 Odyssey Home Gym
(#3). Repeat the
Left and
and organize