Introduction - Odyssey ODY-5 Owner's Manual

A
bout the Odyssey 5 Home Gym (ODY-5)
Congratulations on your new purchase of the Odyssey 5 Home
Gym (ODY-5). This gym is capable of a variety of different
exercises, as well as, smooth and user-friendly adjustment
features. In addition, this gym has been designed to meet the
needs and performance requirements for a suitable home exercise
machine. We hope you are completely satisfied with this product
and wish you many years of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
indicating final inspection has been conducted by our line foreman,
is an expression of our confidence in the completeness, the
materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on file with our factory, be
sure to complete the warranty registration card and send it to Task
Industries today.
S
pecifications
1. Maximum Wt. Capacity
2. Total Machine Weight
3. Footprint (LWH)
P
rior to the Assembly of the ODY-5
1. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this Odyssey 5 Home Gym (ODY-5).
2. Consider the complete surface area of the ODY-5. Use the
overhead view on the front page for designing your layout before
assembling. Once the ODY-5 has been fully assembled it will be
heavy and difficult to move, therefore you should assemble the
ODY-5 in the area where it is to be used upon completion.
3. It is recommended that another person assist you with the
assembly this unit.
4. Neatly organize and identify all parts according to the Parts List
on page 25 and the Exploded View Diagram on page 24.
T
ool Requirements
1. One 9/16" combination wrench
2. One 3/4" combination wrench
3. One 7/8" combination wrench
4. Two 7/16" combination wrenches
5. One 1/2" combination wrench
6. One ratchet
7. One 9/16" socket
8. One 3/4" socket
9. One rubber mallet
10. External retaining-ring pliers
11. Windex or household glass cleaner
12. One can silicone spray/ teflon spray lubricant
13. Multi-purpose grease
14. Measuring tape
15. Masking tape
16. Utility knife
1

Introduction

- 200 Lbs. Fixed
- 475 Lbs.
- See Front Cover
A
bout the Icons
The icons displayed in this Owner's Manual are used to facilitate
the correct assembly and safe use of this Product, as-well-as to
prevent injury to yourself or anyone else.
A Note provides information necessary to properly
complete a procedure or information which will make
the procedure easier to understand.
A Caution provides a special procedure or special
steps which must be taken while completing the
procedure where the Caution is found. Not following
a Caution can result in damage to the equipment.
A Warning provides a special procedure or special
steps which must be taken while completing the
procedure where the Warning is found . Not following
a Warning can result in personal injury.
Loosely Fasten
fasten ( hand tighten) a hardware assembly only.
ex:
This instruction is intended for the alignment of
hardware components during the assembly process.
LOOSELY FASTEN
Fully Fasten provides a instruction to fully fasten
( completely tighten) a hardware assembly.
ex:
F U L L Y F A S T E N
WARNING
This will notify you of lifting heavy components. It is
advisable to lift with your legs, not with your back, to
avoid a possible back injury.
A
ssembly Notes
1. Read and follow each step of this Assembly Instruction Manual in
sequence. Do not skip ahead, as it will result in an improper
assembly or in having to disassemble parts later.
2. During the assembly of this unit you will be instructed to leave
some Hex Head Cap Screws loosely fastened. Naturally, they
will be fully fastened later in the assembly process. This is done
to prevent any difficulty with alignment of some parts during this
assembly.
Hardware Measurement Diagram
Note: Due to continuing product improvements, specifications and designs are subject to change
without notice.
Even though we have prepared this manual with extreme care, neither the publisher nor the author
can accept responsibility for any errors in, or omission from, the information given.
provides a instruction to loosely
ODY-5 Odyssey Home Gym