Odyssey ODY-5 Owner's Manual page 6

FIG. 11 Next, attach the Leg Extension Arm
shown, to the Leg Extension Bench Frame (#11)
place using one Leg Extension Axle 1/2 X 2 1/2
Leg Extension Axle 1/2 X 2 1/2 (#9)
1/4-20 X 3/8 (#48), as shown in caption above. Use the supplied Hex Key
Long 1/8 (#109) for fastening these Set Screws 1/4-20 X 3/8 (#48). Next,
insert one Plastic Insert Cap 1 1/2 Sq. (#67) into the tube-end of the
Extension Arm (#12).
Note: It is recommended to grease the
2 1/2 (#9) with multi-purpose grease prior to assembling.
FIG. 13 Next, attach the Top Pulley Assembly (#5)
Upright (#4) and secure it into place using two Hex Head Cap Screws
3/8-16 X 3 1/4 (#89), four Flat Washers SAE 3/8" (#71) and two Nylon
Insert Lock Nut 3/8-16 (#81). Next, insert one Plastic Insert Cap 2" Sq.
(#66) into the tube-end on the Rear Upright (#4).
Fully Fasten: Proceed to align and fully fasten this hardware as-
sembly and all the previous assemblies that were left loosely fas-
tened.
FULLY FASTEN
5
(#12), in the position as
and secure it into
(#9). Next, secure the
into place using two Set Screws
Leg
Leg Extension Axle 1/2 X
to the Rear
FIG. 12 Attach the Top Pulley Assembly
shown, to the Front Upright (#3)
Head Cap Screws 3/8-16 X 4 1/4 (#88), four Flat Washers SAE 3/8" (#71)
and two Nylon Insert Lock Nuts 3/8-16 (#81).
Loosely Fasten: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in the
assembly process.
LOOSELY FASTEN
FIG. 14 Next, attach two Nylon Pulleys 4 1/2 Rd. (#64-Labeled A,B)
into the pulley brackets located on the
secure them into place using two Hex Head Cap Screws 3/8-16 X 2 1/2
(#92), four Flat Washers SAE 3/8" (#71) and two Nylon Insert Jam Lock
Nuts 3/8-16 (#82). Next, attach four Nylon Pulleys 4 1/2 Rd. (#64-
Labeled P,G,N,H) into the pulley brackets located on the
Assembly (#5) and secure them into place using two Hex Head Cap
Screws 3/8-16 X 2 3/4 (#91), four Flat Washers SAE 3/8" (#71) and two
Nylon Insert Jam Lock Nuts 3/8-16 (#82).
(#5), in the position as
and secure it into place using two Hex
Top Pulley Assembly (#5)
Top Pulley
ODY-5 Odyssey Home Gym
and