Installing Your Microwave Oven; Cleaning The Turntable And Roller - Samsung MS11J5023A User Manual

INSTALLING YOUR MICROWAVE OVEN

Place the oven on a flat level surface 85 cm above the floor. The surface should be strong
enough to safety bear the weight of the oven.
NOT FOR BUILT-IN INSTALLATION
1. When you install your oven, make sure there is
adequate ventilation for your oven by leaving
at least 10 cm (4 inches) of space behind and,
on the sides of the oven and 20 cm (8 inches)
of space above.
Remove all packing materials inside the oven.
2.
Install the roller ring and turntable. Check that
3.
the turntable rotates freely. (Turntable type
model only)
4. This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. For your personal safety, plug the cable
into a proper AC earthed socket.
Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or
radiator. The power supply specifications of the oven must be respected and any extension cable
used must be of the same standard as the power cable supplied with the oven. Wipe the interior
and the door seal with a damp cloth before using your microwave oven for the first time.

CLEANING THE TURNTABLE AND ROLLER

RINGS
Clean the roller rings periodically and wash the turntable as required. You can wash the
turntable safely in your dishwasher.
MS11J5023AS_AC_DE68-04366A-00_EN.indd 15
20 cm above
85 cm of
the floor
SAVE THESE INSTRUCTIONS
10 cm
behind
10 cm on
the side
English 15
2015-04-24 6:20:28