Samsung MS11J5023A User Manual page 51

Troubleshooting
Problem
The brightness inside
the oven varies.
Cooking is finished,
but the cooling fan is
still running.
Pressing the +30sec
button operates the
oven.
Turntable
While turning, the
turntable comes out of
place or stops turning.
The turn table drags
while turning.
The turn table rattles
while turning and is
noisy.
50 English
MS11J5023AS_AC_DE68-04366A-00_EN.indd 50
Cause
Brightness changes depending on
power output changes according to
function.
To ventilate the oven, the cooling fan
continues to run for about 3 minutes
after cooking is complete.
This happens when the oven was not
operating.
There is no roller ring, or the roller
ring is not properly in place.
The roller ring is not properly in
place, there is too much food, or the
container is too large and touches
the inside of the microwave.
Food residue is stuck to the bottom
of the oven.
Action
Power output changes
during cooking are not
malfunctions. This is not an
oven malfunction.
This is not an oven
malfunction.
The microwave oven is
designed to operate by
pressing the +30sec button
when it was not operating.
Install the roller ring and
then try again.
Adjust the amount of food
and do not use containers
that are too large.
Remove any food residue
stuck to the bottom of the
oven.
2015-04-24 6:20:45