Sanyo PLC-XP21N Service page 31

SERV)CE MODE OPERATION
To change the mode from the Norma)
mode to the Service mode by pressing
the "MENU" and "NORMAL" buttons
on the projector simu)taneous!y and
hotd for 3 seconds.
Press the "POWER ON/OFF" button
on the projector or remote centre) unit
to quit the service mode.
Norma) Mode
"MENU"
"NORMAL"
j .
Service Mode
"POWER ON/OFF" /
t Adjust the service data with the
fottowing contro) buttons.
1. Press the "PO)NT A V " buttons on the
projector to change the adjustment !tem.
2. Press the "VOLUME + -" buttons on the
projector to adjust the data va)ue.
Data no.
Data
Service
Mode
Ver.1.0
the adjustment vatue /
the adjustment itam "VOLUME -t- -"^'
"PONTAV .^
31