Sanyo PLC-XP21N Service page 3

Mechanica) disassemble shoutd be made foUowing procedures in numertcai order.
Foitowtng steps show the basic procedures, therefore unnecessary step may be ignored.
Cautton:
The parts and screws shoutd be placed exactty the same posftton as the origina) otherwise H may cause toss of per-
formance and product safety
1. COVER TOP REMOVAL
1) S)kte the )ocking )evsr in the direction of the arrow by using slot
screwdriver (Fig.1) and tift up the cover sttghtty.
2) tnseft two 1mm s!ot screwdrivers to the siots of the cabinet top at
the same time. Turn them in the arrow direction gontty to !tft off the
cover top upward.
Note:
Be carefui not to damage the cabinet
finish when removing M.
COVER TOR
2. CABINET TOP REMOVAL
1) Remove 4 screws on side cabinet and 1 screw on rear.
2) Grasp the two stdes. pu)i the cabinet top upward and remove.
CABLET TOP ^