Sanyo PLC-XP21N Service page 16

tf the tamp fai!s to come on and the tamp replacement indicator on
the projector !ight is orange, you must replace the !amp.
^ For continued safety, replace with a lamp assembly of the same type.
part NO. 6102822755
^ AHow the projector to coo) for at teast 45 minutes before you open the tamp
cover. The inside of the projector can become very hot.
^ Do not drop the iamp modu!e or touch the glass buib! The giass can shatter and
cause injury.
^FoUQW those steps to replace the tamp assembly.
1. Turn off the projector and a))ow the projector to coo) thoroughfy.
2. Disconnect the AC cord from the projector.
3. Remove screw with a screwdriver and remove the tamp cover.
4. Remove 2 screws with a screwdriver and putt out the tamp assembfy
by grasping the handle.
5. Replace the [amp assambty.
6. Tighten 3 screws to secure the tamp cover to the tamp assembty.
7. Connect the detachabte AC cord to the projector.
8. Reset the [amp replacement monitor timer. (Refer to next page.)
Turn off. Remove AC cord and wait 46 mitKftes bofofe open this tamp cover.
Refer owner'? manuat for reptacing the tamp- Reptace whh same type tamp.
Eteindre f'apparait. Entever )a Cordon aectauf et attendra 46 minutes avant
d'owrir ce couvercte.
Se ntportar au mode d'empfoi pour remp!acer t< tampe. RetDpbcar fa tampe
par un mode) ktentique.
Schatten Sie den Projektor aus. z!ehen Sia dss Stromkabet aus dam Projektor
und warten Sie 45 Mnuten. bevor Sie den Pn3}ektof offnen.
LeMn Sie im Manua) im Kapite! ' LampenwechM)" die Dataits nacfi.
Benutzen Sie nur cine offiziette Ersatz !ampe dM gfeichon Typt. ^
Apagua e) aparato. Desconocte a) cabte da rad y aapera 45 minutoe antes
t de abrir ta tapa.
Consuho o! manuat de instnjccionss para cambiof ta tampafa.
Cambte ta !ampam per otra de) mismo t^M.
Stang sv projektom. Dra ur Kontattteti och vanta 46 neuter innan Ni oppnar
^skydoet. VtharMsartititnstruk^onsbotcBninnan MbylBrtampa.
Anvand aamma typ av tampa.
Sk'ttforpfojetctorBn. ^jemnettedningenfras^hkontaktenogvent 45 rnif)..
tfar kabinettetabnes- Seibnjgsanvisningen.ferfampenshiftM.
Brug samme type tampe. n
Lamp cover
Lamp
AssemMy
WARNtNG
ALLOW TO COOL BEFORE ATTEMPTtNG
TO CHANGE THE LAMP.
USE ONLY REPLACEMENT LAMP PART
N0.6102822755
16