Prepare The Pvr For Interactive Tv; Before You Begin; Overview; Insert The Smartcard - Cisco 8455DVB Quick Reference

High-definition personal video recorder met video-on-demand

Hide thumbs Also See for 8455DVB:

Available languages

Prepare the PVR for Interactive TV

Attention: Before you start the installation of the Cisco 8455DVB PVR, you must ﬁ rst complete the

steps in the "Installatie Hoofdaansluiting Interactieve Televisie."

Warning: Electric shock hazard. Unplug all electronic devices before connecting or

disconnecting any device cables to the PVR.

Complete the following steps to prepare and activate the PVR for Interactive TV and you will soon be

enjoying high-quality programming using the Cisco 8455DVB HD PVR.

1. Insert the smartcard into the front of the PVR.

2. Connect the PVR to your TV.

3. Prepare the PVR by entering your account information.

4. Customize the language settings.

5. Customize the PVR settings.

6. Set the audio and video formats.

7. Set the Parental Control PIN.

8. Programme the remote control to operate your TV (optional).

9. Enjoy using the PVR to watch and record your favourite shows.

When you purchased the PVR you should also have purchased a smartcard. The smartcard is necessary

to operate the PVR.

1. Insert the smartcard into the front of the PVR with the chip side down.

2. Once inserted, do not remove the smartcard.

Tip: The PVR will not operate without the smartcard.

CISCO 8455DVB

opnemen

T13632

Chip

(Insert this side down)

T13633

Table of Contents