Isplays - NEC NEAX 2400IPX Dterm i Series User Manual

FACE LAYOUT
1 C I L
ALL NDICATOR AMP
Lamp at top corner of Dterm Display flashes when a
call terminates to the terminal. Lamp lights steadily
when a message has been left.
2 LCD(N 1)
OTE
Liquid Crystal Diode (LCD) display provides Dterm
activity information plus date, time and Soft Key
Operation. The LCD display has 24-character, 3-line
capability.
3 E
XIT
The user can escape from the Help key mode by
pressing this key.
4 S K
OFT EYS
Any feature shown at the bottom of the LCD display is
available. The appropriate feature key is displayed on
the screen according to the call handling process.
5 H
ELP
Explanations of the Soft Keys can be called up on the
LCD display by pressing this key.
6 P K
ROGRAMMABLE EYS
[Programmable by telephone system administrator
(Flexible Line/Feature Keys)]
• Station line access
• Trunk line access
• Feature access
[Programmable by user (Flexible Line/One-Touch
Speed Dial)]
<Flexible Line>
• Station line access
• Trunk line access
• Feature access
<One-Touch Speed Dial> (Note 2)
• Any feature can be assigned.
• Direct station selection
• Station speed dial
7 R
ECALL
Press key to terminate established call and return to the
internal dial tone.
8 F
EATURE
Used to activate terminal setup functions and to
program One-Touch Speed Dial/Feature Keys.
9 D (N 3)
IRECTORY OTE
Press key to activate speed calling – system feature.
10 M (N 3)
ESSAGE OTE
Press key to access the voice mail system.
11 M
IC
Press key to respond hands free. LED on this key lights
during speakerphone operation.
12 C
ONF
Press key to establish a three-way conversation. LED
on key lights when key is active.
13 LNR/SPD (L N
AST UMBER
Press key to activate redial feature. Press redial and
scroll back through numbers that have been dialed until
the desired number is displayed. Press the
4) key to activate dialing.
70
C /S C )
ALL PEED ALLING
or # (Note