Page 1
Created: May 11, 2015 Last updated: May 11, 2015 Please note that AXIS does not take any responsibility for how this configuration may affect your system. If the modification fails or if you get other unexpected results, you may have to restore the factory default settings as described in the...
Page 2
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE Rev: 1.1 Introduction The following document highlights how to add a door station to Axis Camera Station and then complete further configurations that can be made to meet an operator’s need:...
Page 3
3) Select Notifications and select “Beep” or “Sound file”. Useful alarm .wavs can be found on the internet. Note: Use this when configuring any alarm on Axis Camera Station to trigger and audible alert on the operators PC and not just an event in the alarm box.
Page 4
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE Step 3 – Create a trigger associated to the call Configure an event trigger associated to the call: 1) Select “Configuration”/ “Event Configuration”/ (you will see the default record and door open rules created by the door station and any others already configured in the system).
Page 5
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE Step 4 – Create actions associated to the trigger You can now create actions associated with the trigger. The following describes how the call will trigger the audible alert and log it with the alarm list.
Page 6
Step 5 – Record the audio and video from the door station You can record the audio from the door station as well as the video. Note that only the audio from the door station will be recorded, the audio from the Axis Camera Station client will not be recorded.
Need help?
Do you have a question about the AXIS Camera Station and is the answer not in the manual?
Questions and answers