Top Features - NEC VT770 User Manual

Top Features

1. POWER Button (ON / STAND BY) (
Use this button to turn the power on and off when the
main power is supplied.
To turn on or off the projector, press and hold this but-
ton for a minimum of two seconds.
2. POWER Indicator
When this indicator is green, the projector is on; when
this indicator is orange, it is in standby mode. See the
Power Indicator section on page
3. STATUS Indicator
If this light blinks red rapidly, it indicates that an error
has occurred, the lamp cover is not attached properly
or the projector has overheated.
If this light remains orange, it indicates that you have
pressed a cabinet button while the Cabinet Button is
locked. See the Status Indicator section on page
for more details.
4. LAMP Indicator
If this light blinks red rapidly, it's warning you that the
lamp has reached the end of its usable life. After this
light appears, replace the lamp as soon as possible
(See page 109). If this is lit green continually, it indi-
cates that the lamp mode is set to Eco. See the Lamp
Indicator section on page
5. SOURCE Button
Use this button to select a video source such as a PC,
VCR, DVD player or Viewer (PC card).
Press and release this button quickly to display the
Source List.
Each time this button is pressed for a minimum of ONE
second, the input source will change as follows:
Computer1 Computer2
S-Video Viewer
If no input signal is present, the input will be skipped.
9 8
SELECT
PC CARD
10 12
)
113 for more details.
113 for more details.
Component Video
Entry List Computer1
5 6 4
SOURCE AUTO ADJUST
3D REFORM ON/STAND BY
11 7 1 2
6. AUTO ADJ. Button
Use this button to adjust Position-H/V and Pixel Clock/
Phase for an optimal picture (See page 37). Available
for the RGB signal only.
7. 3D REFORM Button
Press this button to enter 3D Reform mode to correct
the keystone (trapezoidal) distortion, and make the
image square. See pages
8. MENU Button
Displays the menu.
9. SELECT
: Use these buttons to select the menu of the
item you wish to adjust.
: Use these buttons to change the level of a se-
lected menu item.
113
A press of the
tion. When no menus appear, these buttons
work as a volume control.
When an image is magnified, the SELECT
button moves the image.
10. ENTER Button
Executes your menu selection and activates items
selected from the menu.
11. CANCEL Button
Pressing this button will return to the previous menu.
While you are in the main menu, pressing this button
will close the menu.
12. PC CARD Access Indicator
Lights while accessing a PC card.
...
14
LAMP
3
STATUS
POWER
35 and 44.
/ Volume Buttons
button executes the selec-
1. Introduction