NEC VT770 User Manual page 18

OFF
VIDEO
S-VIDEO
3D REFORM
16
ASPECT
18
VOLUME MAGNIFY
19
20
PICTURE
22
PIC-MUTE
23
15. PJ Button
Press this button to switch the SELECT, CANCEL, and
ENTER buttons between the Projector mode (lit red)
and the Computer mode.
Press this button or any one of the POWER ON/OFF,
MENU, 3D REFORM, ASPECT, POINTER, HELP,
MAGNIFY, VIEWER or PICTURE buttons to switch to
the Projector mode and the PJ button lights red. To
switch back to the Computer mode, press the PJ but-
ton again. See page 40.
16. 3D REFORM Button
Press this button to enter 3D Reform to correct the
keystone (trapezoidal) distortion, and make the im-
age square. See pages
17. SOURCE Button
Use this button to select a video source such as a PC,
VCR, DVD player or Viewer (PC card).
Press and release this button quickly to display the
Source List.
Each time this button is pressed for a minimum of ONE
second, the input source will change as follows:
Computer1 Computer2
S-Video Viewer
If no input signal is present, the input will be skipped.
ON
POWER
AUTO ADJ.
COMPUTER
1 2
COMPONENT
SELECT
PJ
15
SOURCE
17
POINTER VIEWER
24
SLIDE
25
21
FREEZE
26
HELP
27
35 and 44.
Component Video
Entry List Computer1
18. ASPECT Button
Press this button to display the Aspect Ratio select
screen. See page 82.
19. POINTER Button
Press this button to display one of the nine pointers;
press again to hide the pointer. You can move your
pointer icon to the area you want on the screen using
the SELECT
20. VOLUME (+)(–) Button
Press (+) to increase the volume and (–) to decrease
it.
21. MAGNIFY (+)(–) Button
Use this button to adjust the image size up to 400%.
The image is magnified about the center of the screen.
See page 41.
22. PICTURE Button
Press this button to display the Picture window. Each
time this button is pressed, the option will be changed.
See page 78.
23. PIC-MUTE Button
This button turns off the image and sound for a short
period of time.
Press again to restore the image and sound.
24. VIEWER Button
Press this button to select the Viewer source.
25. SLIDE (+)(–) Button
Press (+) to select the next folder or slide and (–) to
select the previous folder or slide. See page 58.
26. FREEZE Button
This button will freeze a picture. Press again to re-
sume motion.
27. HELP Button
Provides suitable HELP information.
NOTE: The default is the Computer mode, which allows you to
use the SELECT, CANCEL, and ENTER buttons as your computer
mouse. When the POWER ON/OFF, MENU, 3D REFORM, AS-
PECT, POINTER, HELP, MAGNIFY, VIEWER or PICTURE button
is pressed, the PJ button lights red to indicate that you are in the
Projector mode. If no buttons are pressed within 60 seconds,
the light goes out and the Projector mode is canceled.
...
18
1. Introduction
button. See page 41.