Connecting Your Dvd Player With Component Output - NEC VT770 User Manual

Connecting Your DVD Player with Component Output

Audio Equipment
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
NOTE: For a DVD player without component video (Y,Cb,Cr/Y, Pb, Pr) output, use an S-Video cable (not provided) to connect an
S-Video output of the DVD player to the S-VIDEO input of the projector.
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr/Y, Pb, Pr) output, use a commercially available component
video cable (RCA 3) to connect your DVD player to the COMPONENT input connectors on the projector.
Use an audio cable (not supplied) to connect the audio from your DVD player to your audio equipment (if your DVD
player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Connect the supplied power cable. See page 28.
4. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
COMPONENT
COMPONENT
PC CARD USB(MOUSE)
USB(COMPUTER)
MONITOR OUT AUDIO COMPUTER 1 AUDIO
S-VIDEO
PC CONTROL COMPUTER 2 AUDIO
AUDIO
AC IN
AUDIO IN
L R
2. Installation and Connections
Y Cb/Pb Cr/Pr
AUDIO
L/MONO R
AUDIO
VIDEO L/MONO R
DVD player
L R Y
AUDIO OUT Component
Audio cable (not supplied)
26
Component video RCA 3
cable (not supplied)
NOTE: The "Y" connector accepts
a Video signal. A Video signal
will be automatically displayed. If
not, from the menu, select
[Setup] [Page 3]
Select] [Component]
[Video].
Cb Cr
[Signal