Part Names Of The Projector - NEC VT695 User Manual

Part Names of the Projector

Front/Top
Zoom Lever (VT695/VT595/VT590/VT490/VT59)
Digital Zoom Button (VT49)
Remote sensor
( page 8)
Focus Ring
( page 24)
Lens Cap
* This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark of
Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.
Rear
Terminal Panel
( page 6)
Monaural Speaker
(VT695/VT595: 5W)
(VT590/VT490/VT59/VT49: 1W)
( page 24)
Lens
Main Power Switch
When you plug the supplied power cable into an active wall outlet
and turn on the Main Power, the POWER indicator turns orange
and the projector is in standby mode.
( page 20,28)
Controls
( page 5)
Ventilation (inlet) / Filter Cover
(
Two filters on VT695, VT595, VT590
and VT490
One filter on VT59 and VT49
Built-in Security Slot (
Remote sensor (VT695 and VT595 only)
(
Ventilation (outlet)
Heated air is exhausted from here.
AC Input
Connect the supplied power cable's two-pin plug here, and
plug the other end into an active wall outlet. (
3
1. Introduction
page 50)
)*
page 8)
page 19)