Color Management; Gamma Correction; Color Correction; User Adjust - NEC VT650 User Manual

Color Management

Gamma Correction

Color Correction

White Balance

Gamma Correction (Advanced mode)
Gamma Correction
Graphic Linear
Use the or buttons to choose one mode from three options.
Each mode is recommended for :
Graphic: For graphics
Linear: For line art such as CAD
Black Enhance: For dark portions of a picture
Color Correction (Advanced mode)
Color Correction
OFF
Mode1
Mode2
Mode3
sRGB
User1
User2
This option allows you to adjust neutral tint for yellow, cyan or
magenta.
There are 4 factory presets optimized for various types of im-
ages, or you can set 2 user adjustable settings.
OFF: Turns off the Color Correction. You obtain
the brightest image.
Mode 1: Recommended for true flesh tones
Mode 2: Recommended for turf color
Mode 3: Recommended for deep red
sRGB: Standard color values
User 1: User adjustable
User 2: User adjustable
When selecting User 1 or 2, the submenu below will be displayed.
You can customize each color or tint.

User Adjust

Color Tune: Adjusts the Tint on whole screen for RGB.
Yellow: Adjusts yellow to obtain reddish yellow or
greenish yellow
Magenta: Adjusts magenta or purple to obtain reddish
magenta or bluish magenta.
Cyan: Adjusts cyan or light greenish blue to ob-
tain greenish or bluish cyan.
White (On/Off): Select "On" for a bright white image; "Off"
for a natural white image.
Black Enhance
E–34
White Balance (Advanced mode)
White Balance
Brightness Red
Brightness Green
Brightness Blue
Contrast Red
Contrast Green
Contrast Blue
This allows you to adjust the white balance. Brightness for each
color (RGB) is used to adjust the black level of the screen; Con-
trast for each color (RGB) to adjust the white level of the screen.
First use the or buttons to select R, G, or B for the bright-
ness and the contrast. Next use the
level.

Projector Options

Menu

Setup
Menu
Menu

Menu mode

Language

Source Display

No Input Display
Volume Bar
Keystone Bar
Filter Clean Message
Menu Display Time
Allows you to set preferences for the on-screen menu.
<Menu Mode>
This feature allows you to select two menu modes: one has
basic functionality and the other more advanced functional-
ity.
Basic Mode: This is the normal mode.
Advanced Mode: This mode is used for advanced users.
<Language>
You can choose one of seven languages for on-screen in-
structions. The options are: English, German, French, Ital-
ian, Spanish, Swedish and Japanese.
NOTE: The "Language" setting cannot be reset back to
"English" using the Factory Default function.
<Source Display>
You can turn on and off the information for input name such
as VIDEO and RGB.
When this option is on, the current input will be displayed
each time you switch sources or turn on the projector.
0
0
0
0
0
0
or buttons to adjust the
Basic
English
On Off
On Off
On Off
On Off
On Off
Auto 45 Sec