Advertisement
Note:
1. To protect your network from any unauthorized access it is recommended to enable
wireless encryption.
The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your
wireless adapters do not support WPA or WPA2, then select WEP.
WEP encryption only supports 802.11b/g speed of up to 54Mbps.
Once encryption is enabled on the router, each wireless computer and device must
be configured with the same encryption key.
16. S e le ct the desire d W P A m ode, enter
ch aracters fo r yo u r Pre-S hared key and then
clic k N e xt. For W P A -P S K or W P A 2-P S K , the
P re-S hared Key m ust be betw een 8 and 63
A S C II or 64 H E X characters. M ake sure to
copy dow n the P re-S ha red Key. You w ill need
the Pre-S hared K ey w hen you config ure your
w ire le ss adapter(s).
5
Advertisement
