Turning Off The Projector; After Use - NEC VT37 User Manual

Turning off the Projector

To turn off the projector:
First, press the POWER (ON/STAND BY) button on the
projector cabinet or the POWER OFF button on the re-
mote control. The "Power Off / Are you sure?" message
will appear.
Secondly, press the ENTER button or press the POWER
(ON/STAND BY) or the POWER OFF button again.
The power indicator will glow orange. After the projector
turns off, the cooling fans keep operating for 30 seconds
(Cooling-off time).
Immediately after turning on the projector and displaying
an image, you cannot turn off the projector for 60 sec-
onds.
Finally, turn off the Main Power switch. The power indica-
tor will go out.
CAUTION
Do not unplug the power cable from the wall outlet or do not turn off
the main power under any one of the following circumstances. Doing
so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. (The cooling fans continue to
work for 30 seconds after the projector is turned off)

After Use

Preparation: Make sure that the projector is turned off.
1. Unplug the power cable.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
5. Put the projector and its accessories in the supplied soft case.
3. Projecting an Image (Basic Operation)
SELECT
Power On
LAMP
STATUS
POWER
Steady green light
26
LAMP
STATUS
POWER VIDEO S-VIDEO COMPUTER
ON/STAND BY
AUTO
ADJ.
OFF ON
POWER
MAGNIFY PIC-MUTE PAGE
UP
DOWN
MENU
ENTER
EXIT
Fan running Standby
LAMP
STATUS
POWER
Blinking Steady orange
orange light
IN
A C
LAMP
STATUS
POWER
light