Installation And Connections; Setting Up The Screen And The Projector; Selecting A Location - NEC VT37 User Manual

2. Installation and Connections

This section describes how to set up your projector and how to connect video and audio sources.
2

Setting Up the Screen and the Projector

Selecting a Location

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 25" (0.64 m) measured diagonally when the projector is roughly 23 inches (0.6 m) from the wall or
screen. The largest the image can be is 300" (7.6 m) when the projector is about 287 inches (7.3 m) from the wall or
screen. Use the drawing below as a guide.
609.6(W) 457.2(H) / 240(W) 180(H)
487.7(W) 365.8(H) / 192(W) 144(H)
406.4(W) 304.8(H) / 160(W) 120(H)
365.8(W) 274.3(H) / 144(W) 108(H)
304.8(W) 228.6(H) / 120(W) 90(H)
243.8(W) 182.9(H) / 96(W) 72(H)
203.2(W) 152.4(H) / 80(W) 60(H)
162.6(W) 121.9(H) / 64(W) 48(H)
121.9(W) 91.4(H) / 48(W) 36(H)
81.3(W) 61.0(H) / 32(W) 24(H)
50.8(W) 38.1(H) / 20(W) 15(H)
Lens center
NOTE: Digital Zoom can cause result in a blurry image because zooming is made electronically.
3
Screen Size (Unit: cm/inch)
2 0
0
1 8
0
"
1 5
0
"
1 2
0
"
1 0
0
"
8 0
"
6 0
"
4 0
"
2 5
"
AC IN
Your projector is simple to set up and use.
1
But before you get started, you must first:
z Set up a screen and the projector.
x Connect your computer or video equip-
c Connect the supplied power cable. See
NOTE: Ensure that the power cable and any
other cables are disconnected before moving
the projector. When moving the projector or
when it is not in use, cover the lens with the
lens cap.
To the wall outlet.
Screen Size
3 0
0
"
2 4
0
"
"
11
ment to the projector. See pages
17.
page 18.
14 to