Optimizing RGB Picture Automatically
Adjusting the Image Using Auto Adjust
Optimizing an RGB image automatically.
Press the AUTO ADJ. button to optimize an RGB image automatically.
[Poor picture]
[Normal picture]
Press the AUTO ADJ. button to fine-tune the computer image or to remove any vertical banding that might appear and
to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer-
ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also
adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image
appears to be shimmering.)
This adjustment may be necessary when you connect your computer for the first time.
NOTE:
Some signals may not be displayed correctly or take time.
• The Auto Adjust function does not work for component and video signal.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and Phase
manually. See pages
41
Turning Up or Down Volume
and 42.
Increase volume
Decrease volume
3. Projecting an Image (Basic Operation)
L-CLICK
VIDEO
S-VIDEO
COMPUTER
VIDEO
S-VIDEO
AUTO
VOLUME
ADJ.
L-CLICK
R-CLICK
MOUSE
VIDEO
COMPUTER
AUTO ADJ.
1
S-VIDEO
2
VOLUME
ASPECT
HELP
PICTURE
FREEZE
25
R-CLICK
MOUSE
COMPUTER
AUTO ADJ.
1
2
ASPECT
HELP
PICTURE
FREEZE