Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IC Realtime K6
Summary of Contents for IC Realtime K6
- Page 1 HDAVS ICR IR Water proof Dome Camera User’s Manual Version 1.0.0...
-
Page 2: Table Of Contents
Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Device Framework ........................2 Installation............................ 3 Menu ............................. 6 HAVR Settings ......................6 Menu Operation ......................6 Appendix Ⅰ Maintenance ........................8... -
Page 3: Important Safeguards And Warnings
Welcome Thank you for purchasing our HDAVS camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings Electrical safety All installation and operation here should conform to your local electrical safety codes. - Page 4 It is recommended to use the device with thunder proof device in order to improve thunder proof effect. The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera. Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust or dirt on the lens surface.
-
Page 5: General Introduction
1 General Introduction 1.1 Overview This series HDAVS camera conforms to the HDAVS standard. It supports video signal high- speed long distance transmission without any delay. It can be controlled by the HAVR. 1.2 Features High-performance CMOS image sensor, megapixel definition. ... -
Page 6: Device Framework
2 Device Framework See Figure 2-1 for the dimension. Figure 2-1 See Figure 2-2 for the structure components. Figure 2-2... -
Page 7: Installation
3 Installation Dome camera mainly uses ceiling installation; installation surface includes ceiling and wall. Attention: Before the installation, please make sure the installation surface is thick enough to sustain at least 3X weight of the camera. For the installation mode of side outlet, make sure the direction of side outlet is in accordance with that of the installation position map when sticking the installation position map. - Page 8 Figure 3-1 Step 3 Put the dome body vertically into the dome enclosure according to the direction shown in Figure 3-2, then cover the compression cover and tighten the screws. Figure 3-2 Note: The lens side of the dome body has to be kept vertical; otherwise, the dome body can’t be inserted into the dome enclosure.
- Page 9 This step doesn’t have to be necessary, please install the device according to the actual product. Step 4 Adjust the dome pedestal location according to the clients’ requirement of top outlet or side outlet, pull out the cable from the side cable slot between installation surface and pedestal (please skip this step if it is top outlet), aim the screw fixing holes on the pedestal at the expansion bolt fixing holes on the installation surface, then tighten the three self-tapping screws into the expansion bolts and fix them firmly, fix the pedestal on the installation surface.
-
Page 10: Menu
4 Menu 4.1 HAVR Settings This HDAVS camera series can adjust OSD menu via coaxial control. After connected the camera to the HAVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDAVS and the protocol as ICR-SD1. Click “Save”... - Page 11 Figure 4-3 See Sheet 4-1 for the details of button functions. Button Function Open menu Select menu item 、 Select menu value 、 Adjust lens zoom and auto trigger focus Note: Adjust lens focus Some of the buttons can only be applied for the motorized Auto focus under current vari-focal camera.
-
Page 12: Appendix Ⅰ Maintenance
Appendix Ⅰ Maintenance Attention: Please maintain the device according to the following instructions in order to ensure the image effect and long-term stable operation of the device. Maintenance for lens and mirror surface The lens and mirror surface are covered with antireflection coating, so it may produce hazardous substance and lead to performance reduction or scratch, dimness etc when it is stained with dust, grease, fingerprint and so on, please refer to the following methods to deal with once dirt is found:... - Page 13 Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners.
Need help?
Do you have a question about the K6 and is the answer not in the manual?
Questions and answers