❾ After Use - NEC NP41G User Manual

❾ After Use
Preparaton: Make sure that the projector s turned off.
1. Unplug the power cable.
2. disconnect any other cables.
3. retract adjustable tilt foot and rear foot if extended.
4. Cover the lens with the lens cap.
5. Put the projector and its accessories in the supplied soft case.
Place the projector in the soft case as shown below. This is to prevent the lens from damage.
Lens
NOTE: When placing the projector in the soft case, retract the tilt foot and the rear feet.
Failure to do so may case damage to the projector.
CAUTION:
Use caution when putting the projector in the soft case immediately after the projector has been operating.
The projector cabinet is hot.
3. Projectng an Image (Basc Operaton)
Lens
8