➎ Using The Bluetooth® Wireless Technology To Transmit Images - NEC NP41G User Manual

❺ Using the Bluetooth
Overvew
Connecting the optional Bluetooth® USB adaptor (NP01BA) to the USB port (Type A) of the projector will allow you
to transmit images wirelessly from your computers or mobile phones with Bluetooth wireless technology to the
projector.
[Important]
• If you remove the Bluetooth® USB adaptor from the projector, all the images that the projector received
will be deleted.
• When the projector goes into the standby mode or when the AC power supply is turned off, all the re-
ceived images will be deleted.
• Received images cannot be stored to the projector.
• The maximum available space for received images in all is 6MB. One image must not exceed 2.5MB in
size.
• If the projector is receiving images beyond the space limit during the transmission, the oldest image will
be deleted and will receive a new image. When the image is received, a confirmation message will not be
displayed.
Typcal Specficatons of Bluetooh® USB Adaptor
Model name
Standard
Transmission method
Frequency range
Transmission output
Supported profiles
Communication distance
Dimensions
Weight
Use environment
Storage environment
• Make sure beforehand that your transmission device supports the BIP or OPP profile according to the user's
manual supplied with your transmission device.
• Bluetooth® USB adaptor (NP01BA) is for the exclusive use of our projectors.
®
wireless technology to transmit images
NP01BA
Bluetooth Ver.2.0+EDR
FH-SS (Frequency-Hopping Spread Spectrum)
2.4GHz band (2402-2480MHz)
2.5mW, Class2
BIP (Basic Imaging Profile)
OPP (Object Push Profile)
Approx. 10m/33 feet (*The communication distance may vary depending on the environ-
ment.)
17.6 mm/0.69"(Width) x 9.0 mm/0.35"(Height) x 56.3 mm/2.22"(Depth)
6g/0.2 oz
Temperature: 0°C to 40°C/ 32°F to 104°F
Humidity: 20 to 80% (non-condensing)
Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 20 to 80%(non-condensing)
. Usng the Vewer (NP/NP)