Connectng the Suppled Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
The projector will go into its stand-
by mode and the POWER indica-
tor will glow orange.
CAUTION:
Do not try to touch the ventilation outlet on the right front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
LAMP
STATUS
POWER
FOCUS
ON/STAND BY
To wall outlet
Make sure that the prongs are fully inserted into both
the power plug and the wall outlet.
C O
M P
U T
E R
IN
V ID
E O
IN
S -V
ID E
O IN
A U
D IO
IN
P C
C O
N T
R O
L
. Installaton and Connectons