Sony PEGA-CC5 Operating Instructions Manual page 78

Operation
The Car Installer is not performed properly.
tYou cannot install the Car Cradle basic software on "Memory Stick" media. Be
sure to download the Car Cradle basic software to your CLIÉ handheld by the
®
operation, then perform Car Installer.
HotSync
I cannot operate normal CLIÉ applications.
While your CLIÉ handheld is in-vehicle mode, the car cradle system restricts certain
applications/functions on your CLIÉ handheld for safety purposes. You cannot
operate normal CLIÉ applications/functions during in-vehicle mode.
®
The HotSync screen is activated when my CLIÉ handheld is mounted in
the car cradle.
tCancel the HotSync
screen after detaching your CLIÉ handheld from the car cradle, then remount the
CLIÉ handheld in the car cradle.
• Are the connectors clean?
tClean the connectors with a cloth, if they are not clean.
The Car Launcher screen is not activated.
• Is the Car Cradle basic software installed?
• Are the connectors clean?
tClean the connectors with a cloth, if they are not clean.
• Is the POWER/HOLD switch of your CLIÉ handheld in the HOLD mode?
I cannot return to the Car Launcher screen from an application (on short
screen type).
The Home icon is not on the screen.
tPress the HOME button on the wireless card remote commander or the Home
button on your CLIÉ handheld.
The time on the time indicator has changed suddenly.
The time on your CLIÉ handheld is updated automatically by GPS data.
The CLIÉ application does not switch to in-vehicle mode screen although I
mounted the CLIÉ handheld in the car cradle.
Depending on the running application, the application cannot be switched.
tDetach your CLIÉ handheld from the car cradle and quit the application, then
remount the CLIÉ handheld in the car cradle.
The screen switches with no operation.
Is the colour changing mode, screensaver or the Today application activated?
tDisable the colour changing mode (page 67), the screensaver (page 65) and the
Today application (page 67).
78
®
operation by tapping the cancel icon on the HotSync
®