Getting Started; Initial Setup Of Your Clié™ Handheld; Installing Software For The Car Cradle - Sony PEGA-CC5 Operating Instructions Manual

Getting started

Initial setup of your CLIÉ™ handheld
Follow the procedure below prior to using your CLIÉ handheld with the car
cradle.
Step 1: Installing software for the car cradle
Step 2: Setting up your CLIÉ™ handheld for the car cradle
Step 3: Mounting your CLIÉ™ handheld in the car cradle
Step 1: Installing software for the car cradle
Before using your CLIÉ™ handheld with the car cradle, you have to install
software for the car cradle on your CLIÉ handheld.
Install the Car Cradle basic software from the supplied Installation CD-ROM.
When you use the SmartST™ Professional application, install the
SmartST™ Professional software, too.
b
For details about installing the SmartST™ Professional software, refer to the
SmartST™ Professional User Manual.
b
For details of the required computer specifications, refer to "Computer system
requirements" on page 82.
Installing the Car Cradle basic software
Note
Before installing the Car Cradle basic software, install the Palm™ Desktop for CLIÉ
software. If the Palm™ Desktop for CLIÉ is not installed on your computer, you will not
be able to complete the car cradle software installation.
b
For details about the Palm™ Desktop for CLIÉ, refer to the manuals supplied with
your CLIÉ handheld.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • •
15