Setting Up Your Clié™ Handheld For The Car Cradle - Sony PEGA-CC5 Operating Instructions Manual

Step 2: Setting up your CLIÉ™ handheld for
the car cradle
Follow the setup procedure according to your CLIÉ handheld type.
Removing the protection cover
(PEG-TG50), and long screen type 2 (PEG-TH55))
Before mounting and using your CLIÉ handheld in the car cradle, you need to
remove the protection cover.
Whenever you use your CLIÉ handheld with the car cradle, remove the
protection cover.
Push in the direction
1 with your left hand.
b
For details about attaching the cover, refer to the manual supplied with your CLIÉ
handheld.
Changing the operating style
(PEG-NX73V))
Before mounting, you need to change the operating style.
Set your CLIÉ handheld to the "turned style."
Open the display and rotate
it as indicated by the arrow
until it clicks into place.
(long screen type
b
Fold the display
over the keyboard.
(short screen type
Remove the right side of
the protection cover from
the hinge of your CLIÉ
handheld by pulling it in
the direction 2.
Remove the protection
cover completely from
your CLIÉ by pushing in
the direction 3.
b
Continued on next page
• • • • • • • • • • • • • • • • • • • • • •
19