Closed Caption Mode Selection - NEC MultiSync XG-1352 Operation Manual

BASIC OPERATION

Closed Caption Mode Selection

Several closed caption modes can be set for text to be superimposed
on the projection screen.
To select and set a mode, proceed as follows:
1 Press the OPERATE button.
• The "OPERATE" menu is displayed.
2 Use the CURSOR
or
CAPTION" item and then press ENTER to display the
"CLOSED CAPTION" menu. You can also select the "CLOSED
CAPTION" menu directly by pressing the INPUT "7" button.
• You can also select the CLOSED CAPTION menu by pressing
the CAPTION button on the remote control.
3 Use the CURSOR
or
ENTER.
• The mode selection is executed.
Items to select
• CAPTION 1–4 ...... Text is superimposed
• TEXT 1–4 ............. Text is displayed in full screen
• OFF ...................... This exits the CLOSED CAPTION mode
NOTE:
1) The closed caption feature will only work with an NTSC3.58
source.
2) Pressing ENTER executes store function. Switching to
source other than NTSC3.58 will cancel this setting. To
activate, select the NTSC3.58 source again.
4 To return to the operate menu, press the END button.
• Wherever the END button is pressed, the screen changes in this
order:
"OPERATE"menu
button to highlight the "7/CLOSED
button to select a mode, then press
source screen
– O P E R A T E –
1 / P I C T U R E
2 / P O S I T I O N
3 / S O U N D
4 / I N P U T S E L E C T
5 / S O U R C E I N F O
6 / S T A T I C
7 / C L O S E D C A P T I O N
8 / T I M E R
C L O S E D C A P T I O N
C A P T I O N 1
C A P T I O N 2
C A P T I O N 3
C A P T I O N 4
T E X T 1
T E X T 2
T E X T 3
T E X T 4
O F F
28