NEC MT 1020 User Manual page 43

Command Codes (continued)
No. Function
34 Image mode Doc Cam
35 Image mode Normal
36 Image mode Natural
37 Power Management On
38 Power Management Off
39 Digital Zoom W
40 Digital Zoom T
41 Brightness
42 Contrast
43 Color
44 Tint
45 Sharpness
46 Audio Volume
47 Picture Adj
48 Fine Picture
49 H Position
50 V Position
51 Lamp Reset
52 Language Select
These commands are subject to change without notice.
*(Low-order data) (High-order data) CSUM
CSUM = Checksum is a low-order digit of the sum from the Code to the immediately
preceding data.
Code Data Description
1DH No
1EH No
1FH No
15H No
16H No
89H No Same as remote
8AH No Same as remote
60H Yes 0 to 63
62H Yes 0 to 63
64H Yes 0 to 63
66H Yes -32 to +31(E0 to 1F)
68H Yes 0 to 3
6AH Yes 0 to 63
70H Yes* MT1020: FFE0H to 001FH (-32 to +31) / MT820: 768 to 1279 (2 byte Code)
6EH Yes MT1020: 0 to 127 / MT820: 0 to 31
72H Yes MT1020: -128 to +127 (80 to 7F) / MT820: -64 to +63 (C0 to 3F)
74H Yes MT1020: -64 to +63 (C0 to 3F) / MT820: -32 to +31 (E0 to 1F)
27H No
3DH Yes 00:English, 01:German, 02:French, 03:Italian, 04:Spanish, 05:Swedish
83
SPECIFICATIONS 84