Visual Systems Division
Technical Bulletin
Installation Data
MT1050
with Optional MT13ZL Zoom Lens (1.3 – 1.6:1)
Contents
Product Description, Lens Specs, Notes and Formulas
Projection Distances and Screen Sizes
Top, Front and Right Side
Bottom, Back and Left Side
Ceiling Mount Dimensions
Product Description
Type:
3 panel, 1.3" p-Si TFT LCD projector
Native Resolution:
1024 x 768
Brightness:
2100 ANSI Lumens
Lens Specifications
MT13ZL Zoom Lens
Throw Ratio:
1.23 – 1.29:1(Wide) / 1.53 – 1.59:1(Tele)
Offset Angle:
13.9 – 14.6 (Wide) / 11.4 – 11.8 (Tele)
Focal Length:
35 – 43mm
F/#:
2.3 – 2.8
Focus Adjustment:
Manual Focus/Manual Zoom
Notes
§
For Screen Sizes of 40 to 200 inches not indicated on the projection tables, use the formulas below.
§
If the figures on the tables do not match the results of formulas, use the figures in the table.
§
The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local
building codes.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
Formulas
Units: Inches (for millimeters multiply final number by 25.4)
D = Screen Diagonal (4:3)
H = D x 0.8
V = D x 0.6
M = 0.95403H
B = 0.3346M
C (Wide) = 1.3623M – 2.325
C (Tele) = 1.6756M – 2.325
D = 0.0585M
-1
(wide) = tan
(B/C(wide))
-1
(tele) = tan
(B/C(tele))
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Dimensions: 11.1"(W) x 4.8"(H) x 16.8"(D) (
Weight:
Screen Sizes:
Distortion:
MTF (
AR Coated:
Chromatic Aberration:
H = Screen Width (4:3)
V = Screen Height (4:3)
M = Projection magnification
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and top of screen (bottom of screen
= Throw angle
17.4 lbs
(w/lens installed)
40 – 300" Diagonal
0.7% TV Distortion
30 lp/mm Green):
Ctr >65% Corner >40%
@
Multi-Layer Coated
Max 10 m
Rev. 1.6
w/lens installed)
for desktop application)
Page 1
Need help?
Do you have a question about the LCDMT1050 and is the answer not in the manual?
Questions and answers