DFI blood-iron G41-T33 User Manual page 17

Internal I/O Connectors
CD-in and S/PDIF-Out Connectors
CD-in
4
Right audio channel
Ground
Ground
Left audio channel
1
SPDIF out
Key
+5V
1
S/PDIF-out
CD-in
The CD-in connector is used to receive audio from a CD-ROM drive, TV tuner or
MPEG card.
S/PDIF-Out
The S/PDIF-out connector is used to connect an external S/PDIF-out port. Your
S/PDIF port may be mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis then connect the
audio cable to the S/PDIF-out connector. Make sure pin 1 of the audio cable is
aligned with pin 1 of the S/PDIF-out connector.
Parallel
Ground
N. C.
5
E
English
17