Lp Mode; Audio Recording Mode - Panasonic PV-GS19 Operating Instructions Manual

• After charging for 4 hours, the built-in lithium battery
can power the clock for approximately 3 months.
• Leave the Camcorder as is for approx. 24 hours, and
the battery will drive the Date and Time for approx.
6 months. (Even if the [OFF/ON] Switch is set to
[OFF], the battery is still being recharged.)

LP Mode

You can switch the tape recording speed.
• Set to Tape Recording/Playback Mode.
Set [ BASIC] or [ ADVANCE] >> [
SPEED] >> [LP].
If the LP mode is selected, the recording
time will be 1.5 times the SP mode, but some
functions will be disabled.
• We recommend using the SP mode for important
recordings.
• In order to fully exhibit the performances of the LP
mode, we recommend using Panasonic cassettes
marked LP mode.
• Audio dubbing is not possible with LP Mode. (p. 44)
• In the LP mode, the picture quality will not be
degraded in comparison with the SP mode, but
mosaic noise may appear on the playback image or
some functions may be disabled.
- Playback on other digital video equipment or on
digital video equipment without the LP mode
- Playback of the image on other digital video
equipment recorded in the LP mode
- Slow Motion/Still Advance playback

Audio Recording Mode

You can select the sound quality of the recorded
sound.
• Set to Tape Recording Mode.
Set [ SETUP] >> [ AUDIO REC] >> [12bit] or
[16bit].
High sound-quality recording is possible with "16 bit
48 kHz 2 track" Mode. With the "12 bit 32 kHz 4 track"
Mode, the original sound can be recorded on 2 tracks
in stereo, while the other 2 tracks can be used for
Audio Dubbing.
Before Using
REC
25