GreenWorks 51152 Operator's Manual page 6

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
no No Load Speed
Alternating Current
.../min Per Minute
Class II Construction
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Injection
Kickback
Electric Shock
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rotational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits etc.,
per minute
Double-insulated construction
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injection or injury, never
direct a water stream towards people or pets or
place any body part in the stream. Leaking
hoses and fittings are also capable of causing
injection injury. Do not hold hoses or fittings.
To reduce the risk of injury from kickback, hold
the spray wand securely with both hands when
the machine is on.
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
6