Appendix 3 Hard Disk Installation - Avtech AVH504P Quick Start Manual

APPENDIX 3 HARD DISK INSTALLATION

Note: It's necessary to install a hard disk first before firmware upgrade to ensure the upgrade process
works properly.
Step1: Remove the top cover, and find the hard disk connector and bracket in the device.
Bracket
Screws
Step2: Get a compatible hard disk. With the PCB side facing down, insert the hard disk to one of the hard disk
connector.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure
the device works properly.
CR2032
11
APPENDIX 3 HARD DISK INSTALLATION
Hard Disk
Connector
Bracket