Setup; Orientation; Cinema Position; Background - NEC LT157 User Manual

Setup

Enables you to set operating options.
Press "OK" to save your changes for all the features of Page1, Page2,
Page3, Page 4 and Page5.
[Page1]

Orientation:

This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.

Cinema Position:

This feature selects the vertical position of the image when viewing
video with Cinema aspect ratio selected.
When Cinema aspect ratio is selected on earlier models, the image
is displayed with black borders on the top and bottom.
You can select the vertical position among three options:
Top .......... Image position is at the top with a black border on bottom.
Center ..... Image position is at the center with black borders on top and
bottom.
Bottom .... Image position is at the bottom with a black border on top.

Background:

Use this feature to display a blue/ black screen or logo when no
signal is available. The default background is blue. You can change
the logo screen using the PC Card Files feature. See page E-40.

Mouse Settings:

This option lets you to change your USB mouse settings. The mouse
settings feature is available for USB mouse only. Choose the set-
tings you want:
Mouse Button ............. "Right Hand" or "Left Hand"
Mouse Sensitivity ....... "Fast", "Medium" or "Slow"
[Page2] PC Card Viewer Options
Show Folder List:
If this option is checked, when PC Card Viewer input is selected on
the projector, the folder lists will be displayed and allows you to
select the presentation from a CompactFlash card.
Auto Play:
If this option is checked, any given slide will start to play automati-
cally.
Auto Play Interval:
You can specify interval time between 5 and 300 seconds.
NOTE: The Auto Play Interval time set on the PC Card Viewer Utility over-
rides the one set here.
Manual Play:
Views a slide manually when PC Card Viewer input is selected.
NOTE: The Auto Play and Manual Play options determine the behavior of
the Play/Stop [ / ] icon on the Viewer toolbar.
NOTE: If you check "Auto Play" and select "PC Card Viewer" on the projector,
the slides will automatically start to play back from any given slide.
Capture Options: (available for JPEG only)
These options are used for the Capture function that you can select
from Tools. You have three options for JPEG compression quality:
High quality, Normal and High Compression.
High Quality ............. Gives quality of JPEG a priority.
Normal ..................... Gives normal JPEG quality.
High Compression ... Gives compression a priority.
[Page3] Signal Select
RGB on LT157, DVI (ANALOG) on LT158:
Allows you to choose "RGB" for an RGB source such as a computer, or
"Component" for a component video source such as a DVD player.
Normally select "Auto" and the projector automatically detects a com-
ponent signal. However there may be some component signals that the
projector is unable to detect. If this is the case, select "Component".
VIDEO and S-VIDEO:
This feature enables you to select composite video standards manu-
ally. Normally select "Auto".
Select the video standard from the pull-down menu.
This must be done for Video and S-Video separately.
E – 37